DLL/3A Thermia B - page 1:2 23/10/2007
Shell Thermia Oil B
High Performance Heat transfer fluid
Shell Thermia Oil B is based on carefully selected highly refined mineral oils chosen
for its ability to provide superior performance in indirect closed fluid heat transfer
systems.
Applications
•
Enclosed circulated heat transfer systems
for industrial applications such as process
industry, chemical plants, textile producers etc.
and in household equipment such as oil filled
radiators.
Thermia B can be used in high temperature
continuous heat transfer equipment with the following
application limits:
Thermia B
Max. film temperature
340°C
Max. bulk temperature
320°C
Performance Features and Benefits
• High oxidation and thermal stability
Thermia B is based on carefully selected highly
refined mineral oils. The rates of oil cracking and
oxidation are very small, giving long oil life. This
assumes an efficient fluid heater with good pump
circulation that the film temperatures on the heater
surface do not exceed the limits above.
•
Low viscosity and high heat transfer
coefficient
Low viscosity enables excellent fluidity and heat
transfer also at lower temperatures.
• Good solvency
• Non-corrosive
• Low vapour pressure
•
Non-toxic oils and easy disposal
Mineral oil heat transfer fluids are safer to handle
than synthetic fluids. After service they can easily
be collected as used oil for recycling or disposal.
Specification and Approvals
Classified as ISO 6743-12 Family Q
Meets typically DIN 51522 requirements
Advice
The life of Thermia oils depends on the design
and usage of the system. If the system is well
designed and not subjected to abnormal
workloads, the life can be for many years.
It is important to monitor oil condition regularly as
rates of change in physical characteristics are
more significant than actual values. The properties
that should be monitored are viscosity, acidity,
flash point (open and closed) and insolubles
content.
Advice on applications not covered in this leaflet
may be obtained from your Shell representative.
Health and Safety
Guidance on Health and Safety are available on
the appropriate Material Safety Data Sheet which
can be obtained from your Shell representative.
Protect the environment
Take used oil to an authorised collection point. Do
not discharge into drains, soil or water.
DLL/3A Thermia B - page 2:2 23/10/2007
Typical Physical Characteristics
Thermia B
Density at 15 °C
kg/m3 ISO 12185 868
Flash Point PMCC
°C ISO 2719 210
Flash Point COC
°C ISO 2592 220
Fire Point COC
°C ISO 2592 255
Pour Point
°C ISO 3016 -12
Kinematic Viscosity
ISO 3104
at 0 °C mm2/s 230
at 40 °C mm2/s 25
at 100 °C mm2/s 4.7
at 200 °C mm2/s 1.2
Initial Boiling Point
°C ASTM D 86 > 355
Autoignition Temperature
°C DIN 51794 360
Neutralisation Value
mgKOH/g
ASTM D974 < 0.05
Ash (Oxid)
%m/m ISO 6245 < 0.01
Carbon Residue (Conradson)
%m/m ISO 10370 0.02
Copper Corrosion (3h/100°C)
ISO 2160 class 1
Coefficient of Thermal Expansion
1/°C 0.0008
These characteristics are typical of current production. Whilst future production will conform
to Shell's specification, variations in these characteristics may occur.
Typical Design Data - Thermia B:
Temperature
°C
0 20 40 100 150 200 250 300 340
Density
kg/m3
876 863 850 811 778 746 713 681 655
Specific Heat Capacity
kJ/kg*K
1.809 1.882 1.954 2.173 2.355 2.538 2.72 2.902 3.048
Thermal Conductivity
W/m*K
0.136 0.134 0.133 0.128 0.125 0.121 0.118 0.114 0.111
Prandtl No.
3375
919
375
69
32
20
14
11
9
